32095
Thermador Ice Maker and Scale Faults in Palencia
Palencia kitchens went in with the houses, so most of what we open is somewhere between its first and second decade. That decides what fails and what it costs.
- Coastal exposure
- No
- Communities
- 1
Mon–Fri 8:00am – 6:00pm Sat 9:00am – 4:00pm
St. Augustine, FL · St. Johns County
Independent Thermador service · St. Augustine, FL
Coverage
St. Augustine and St. Johns County, out to about 40 miles.
Coverage
Every quarter on this list is one we actually drive to. The pages describe the housing stock and the exposure, not a radius drawn on a map.
32095
Palencia kitchens went in with the houses, so most of what we open is somewhere between its first and second decade. That decides what fails and what it costs.
32084
In the 32084 ZIP the coast sets the agenda: corroded condenser fins, seized hinges, and older kitchens that were never wired for what is now in them.
32080
Davis Shores, Marsh Creek and Sea Colony sit between the Matanzas River and the Atlantic. Corrosion is what shortens appliance life on a barrier island.
32092
The kitchens here are twenty to twenty-five years old. That one fact predicts most of what we find, and most of what is worth repairing rather than replacing.
32092
SilverLeaf appliances are young, so almost nothing we find here is wear. It is how the machine was installed, how it was commissioned, and what the opening allows.
No. The same bands apply across the radius; what changes from one quarter to the next is which of them you are likely to meet.
| What gets replaced | Parts and labor |
|---|---|
| Refrigeration column sealed system | $850–$2,520 |
| Control board or touch panel | $430–$1,090 |
Before any of that
$80
Flat $80 diagnostic covering the visit and the full diagnostic sequence, credited toward the repair once you approve the work.
You get a written estimate before any part is ordered or any labor is billed.
4.5
out of 5, across 60 customer reviews. Each one is a single visit, in the words of the person whose kitchen it was.
The keypad on the hood only answered every second press. He renewed the membrane and cleaned the connector behind it. It responds first time now, though he did have to come back once to finish the job.
Seraphina I.
The milk system had stopped foaming and was leaving milk sitting in the line. He stripped the frother, renewed the valve and the tubing, and set up the cleaning routine with us. Foam like it was new.
Gideon Y.
It works now, but it took three visits to get there and nobody warned us the part would sit on order that long. The fault was a thermistor reading high. I would use them again with lower expectations about timing.
Hugo V.
Communities we reach
We name only communities that exist. If an area is not listed, it is because we do not work there often enough to write anything useful about it — not because we would refuse the call. Ask on the phone and we will tell you straight whether it is inside the radius.